Products
Sort by:
{"id":559961866303,"title":"Mayco – Cone 06 - S-2714 Herb Garden","handle":"mayco-s2714","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-19T17:43:09-05:00","created_at":"2018-03-19T17:43:10-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06 S Crystalites Glazes","tags":["discount20","Glaze Line_Mayco (S) Crystalites"],"price":750,"price_min":750,"price_max":2215,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823731257407,"title":"4oz. - Stock Item, Normally ships in one business day","option1":"4oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S27144","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2714 Herb Garden - 4oz. - Stock Item, Normally ships in one business day","public_title":"4oz. - Stock Item, Normally ships in one business day","options":["4oz. - Stock Item, Normally ships in one business day"],"price":750,"weight":227,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823731290175,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S2714P","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2714 Herb Garden - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2215,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2714_Herb_Garden_8f772a6d-bd93-4b34-84c2-37962f43a7da.jpg?v=1715457464","\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_7c3d3675-8365-42a1-b53c-ae7417157354.jpg?v=1715457464"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2714_Herb_Garden_8f772a6d-bd93-4b34-84c2-37962f43a7da.jpg?v=1715457464","options":["Size"],"media":[{"alt":null,"id":24469324660799,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2714_Herb_Garden_8f772a6d-bd93-4b34-84c2-37962f43a7da.jpg?v=1715457464"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2714_Herb_Garden_8f772a6d-bd93-4b34-84c2-37962f43a7da.jpg?v=1715457464","width":400},{"alt":null,"id":24469324693567,"position":2,"preview_image":{"aspect_ratio":1.0,"height":237,"width":237,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_7c3d3675-8365-42a1-b53c-ae7417157354.jpg?v=1715457464"},"aspect_ratio":1.0,"height":237,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_7c3d3675-8365-42a1-b53c-ae7417157354.jpg?v=1715457464","width":237}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - S-2714 Herb Garden
€7.50
PRODUCT DESCRIPTION Mayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals "bloom" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow a...
{"id":559961899071,"title":"Mayco – Cone 06 - S-2715 Spotted Kiwi","handle":"mayco-s2715","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-19T17:43:11-05:00","created_at":"2018-03-19T17:43:13-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06 S Crystalites Glazes","tags":["discount20","Glaze Line_Mayco (S) Crystalites"],"price":750,"price_min":750,"price_max":2215,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823731322943,"title":"4oz. - Stock Item, Normally ships in one business day","option1":"4oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S27154","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2715 Spotted Kiwi - 4oz. - Stock Item, Normally ships in one business day","public_title":"4oz. - Stock Item, Normally ships in one business day","options":["4oz. - Stock Item, Normally ships in one business day"],"price":750,"weight":227,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823731355711,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S2715P","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2715 Spotted Kiwi - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2215,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2715_Spotted_Kiwi_1959c5c7-6986-4860-9b88-626956dc6808.jpg?v=1715457468","\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_f8fad864-57bb-40d5-b073-aa65712c88b9.jpg?v=1715457468"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2715_Spotted_Kiwi_1959c5c7-6986-4860-9b88-626956dc6808.jpg?v=1715457468","options":["Size"],"media":[{"alt":null,"id":24469324726335,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2715_Spotted_Kiwi_1959c5c7-6986-4860-9b88-626956dc6808.jpg?v=1715457468"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2715_Spotted_Kiwi_1959c5c7-6986-4860-9b88-626956dc6808.jpg?v=1715457468","width":400},{"alt":null,"id":24469324759103,"position":2,"preview_image":{"aspect_ratio":1.0,"height":237,"width":237,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_f8fad864-57bb-40d5-b073-aa65712c88b9.jpg?v=1715457468"},"aspect_ratio":1.0,"height":237,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_f8fad864-57bb-40d5-b073-aa65712c88b9.jpg?v=1715457468","width":237}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - S-2715 Spotted Kiwi
€7.50
PRODUCT DESCRIPTION Mayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals "bloom" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow a...
{"id":559961964607,"title":"Mayco – Cone 06 - S-2716 Celestial Blue","handle":"mayco-s2716","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-19T17:43:14-05:00","created_at":"2018-03-19T17:43:15-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06 S Crystalites Glazes","tags":["discount20","Glaze Line_Mayco (S) Crystalites"],"price":750,"price_min":750,"price_max":2215,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823731716159,"title":"4oz. - Stock Item, Normally ships in one business day","option1":"4oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S27164","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2716 Celestial Blue - 4oz. - Stock Item, Normally ships in one business day","public_title":"4oz. - Stock Item, Normally ships in one business day","options":["4oz. - Stock Item, Normally ships in one business day"],"price":750,"weight":227,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823731748927,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S2716P","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2716 Celestial Blue - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2215,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2716_Celestial_Blue_a9000af3-874f-40f7-a022-91b4d591a434.jpg?v=1715457473","\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_4b4a30fc-5499-4e06-be48-25987d4b95b3.jpg?v=1715457473"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2716_Celestial_Blue_a9000af3-874f-40f7-a022-91b4d591a434.jpg?v=1715457473","options":["Size"],"media":[{"alt":null,"id":24469324922943,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2716_Celestial_Blue_a9000af3-874f-40f7-a022-91b4d591a434.jpg?v=1715457473"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2716_Celestial_Blue_a9000af3-874f-40f7-a022-91b4d591a434.jpg?v=1715457473","width":400},{"alt":null,"id":24469324955711,"position":2,"preview_image":{"aspect_ratio":1.0,"height":237,"width":237,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_4b4a30fc-5499-4e06-be48-25987d4b95b3.jpg?v=1715457473"},"aspect_ratio":1.0,"height":237,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_4b4a30fc-5499-4e06-be48-25987d4b95b3.jpg?v=1715457473","width":237}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - S-2716 Celestial Blue
€7.50
PRODUCT DESCRIPTION Mayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals "bloom" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow a...
{"id":559961997375,"title":"Mayco – Cone 06 - S-2718 Cosmic Black","handle":"mayco-s2718","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-19T17:43:15-05:00","created_at":"2018-03-19T17:43:16-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06 S Crystalites Glazes","tags":["discount20","Glaze Line_Mayco (S) Crystalites"],"price":750,"price_min":750,"price_max":2215,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823732109375,"title":"4oz. - Stock Item, Normally ships in one business day","option1":"4oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S27184","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2718 Cosmic Black - 4oz. - Stock Item, Normally ships in one business day","public_title":"4oz. - Stock Item, Normally ships in one business day","options":["4oz. - Stock Item, Normally ships in one business day"],"price":750,"weight":227,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823732142143,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S2718P","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2718 Cosmic Black - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2215,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2718_Cosmic_Black_7093e639-a519-4527-8a93-7fd8e2d9b105.jpg?v=1715457478","\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_f8954360-3322-4972-a58d-ea99058a923e.jpg?v=1715457478"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2718_Cosmic_Black_7093e639-a519-4527-8a93-7fd8e2d9b105.jpg?v=1715457478","options":["Size"],"media":[{"alt":null,"id":24469325119551,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2718_Cosmic_Black_7093e639-a519-4527-8a93-7fd8e2d9b105.jpg?v=1715457478"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2718_Cosmic_Black_7093e639-a519-4527-8a93-7fd8e2d9b105.jpg?v=1715457478","width":400},{"alt":null,"id":24469325152319,"position":2,"preview_image":{"aspect_ratio":1.0,"height":237,"width":237,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_f8954360-3322-4972-a58d-ea99058a923e.jpg?v=1715457478"},"aspect_ratio":1.0,"height":237,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_f8954360-3322-4972-a58d-ea99058a923e.jpg?v=1715457478","width":237}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - S-2718 Cosmic Black
€7.50
PRODUCT DESCRIPTION Mayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals "bloom" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow a...
{"id":559962062911,"title":"Mayco – Cone 06 - S-2723 Grape Divine","handle":"mayco-s2723","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-19T17:43:17-05:00","created_at":"2018-03-19T17:43:18-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06 S Crystalites Glazes","tags":["discount20","Glaze Line_Mayco (S) Crystalites"],"price":750,"price_min":750,"price_max":2215,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823732174911,"title":"4oz. - Stock Item, Normally ships in one business day","option1":"4oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S27234","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2723 Grape Divine - 4oz. - Stock Item, Normally ships in one business day","public_title":"4oz. - Stock Item, Normally ships in one business day","options":["4oz. - Stock Item, Normally ships in one business day"],"price":750,"weight":227,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823732207679,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S2723P","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2723 Grape Divine - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2215,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2723_Grape_Divine_6fe8b018-c65a-4177-a9c2-de61db15a11b.jpg?v=1715457482","\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_e1288d27-79d6-43d1-a70c-b1a059949823.jpg?v=1715457482"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2723_Grape_Divine_6fe8b018-c65a-4177-a9c2-de61db15a11b.jpg?v=1715457482","options":["Size"],"media":[{"alt":null,"id":24469325185087,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2723_Grape_Divine_6fe8b018-c65a-4177-a9c2-de61db15a11b.jpg?v=1715457482"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2723_Grape_Divine_6fe8b018-c65a-4177-a9c2-de61db15a11b.jpg?v=1715457482","width":400},{"alt":null,"id":24469325217855,"position":2,"preview_image":{"aspect_ratio":1.0,"height":237,"width":237,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_e1288d27-79d6-43d1-a70c-b1a059949823.jpg?v=1715457482"},"aspect_ratio":1.0,"height":237,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_e1288d27-79d6-43d1-a70c-b1a059949823.jpg?v=1715457482","width":237}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - S-2723 Grape Divine
€7.50
PRODUCT DESCRIPTION Mayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals "bloom" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow a...
{"id":559962095679,"title":"Mayco – Cone 06 - S-2724 Lotus Blossom","handle":"mayco-s2724","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-19T17:43:19-05:00","created_at":"2018-03-19T17:43:21-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06 S Crystalites Glazes","tags":["discount20","Glaze Line_Mayco (S) Crystalites"],"price":750,"price_min":750,"price_max":2215,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823732240447,"title":"4oz. - Stock Item, Normally ships in one business day","option1":"4oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S27244","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2724 Lotus Blossom - 4oz. - Stock Item, Normally ships in one business day","public_title":"4oz. - Stock Item, Normally ships in one business day","options":["4oz. - Stock Item, Normally ships in one business day"],"price":750,"weight":227,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823732273215,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S2724P","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2724 Lotus Blossom - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2215,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2724_Lotus_Blossom_9048a21d-3628-49ed-971c-8e1d84911998.jpg?v=1715457487","\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_af98b3ef-e7af-4ffc-8104-e5febf9b69c5.jpg?v=1715457487"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2724_Lotus_Blossom_9048a21d-3628-49ed-971c-8e1d84911998.jpg?v=1715457487","options":["Size"],"media":[{"alt":null,"id":24469325250623,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2724_Lotus_Blossom_9048a21d-3628-49ed-971c-8e1d84911998.jpg?v=1715457487"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2724_Lotus_Blossom_9048a21d-3628-49ed-971c-8e1d84911998.jpg?v=1715457487","width":400},{"alt":null,"id":24469325283391,"position":2,"preview_image":{"aspect_ratio":1.0,"height":237,"width":237,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_af98b3ef-e7af-4ffc-8104-e5febf9b69c5.jpg?v=1715457487"},"aspect_ratio":1.0,"height":237,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_af98b3ef-e7af-4ffc-8104-e5febf9b69c5.jpg?v=1715457487","width":237}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - S-2724 Lotus Blossom
€7.50
PRODUCT DESCRIPTION Mayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals "bloom" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow a...
{"id":559962128447,"title":"Mayco – Cone 06 - S-2725 Safari","handle":"mayco-s2725","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-19T17:43:22-05:00","created_at":"2018-03-19T17:43:22-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06 S Crystalites Glazes","tags":["discount20","Glaze Line_Mayco (S) Crystalites"],"price":750,"price_min":750,"price_max":2215,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823732305983,"title":"4oz. - Stock Item, Normally ships in one business day","option1":"4oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S27254","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2725 Safari - 4oz. - Stock Item, Normally ships in one business day","public_title":"4oz. - Stock Item, Normally ships in one business day","options":["4oz. - Stock Item, Normally ships in one business day"],"price":750,"weight":227,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823732338751,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S2725P","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2725 Safari - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2215,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2725_Safari_e4efc7b3-601b-499c-a090-778d63ec4e8b.jpg?v=1715457491","\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_1e618545-cc30-4b65-9517-5f4d32bc2a94.jpg?v=1715457491"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2725_Safari_e4efc7b3-601b-499c-a090-778d63ec4e8b.jpg?v=1715457491","options":["Size"],"media":[{"alt":null,"id":24469325316159,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2725_Safari_e4efc7b3-601b-499c-a090-778d63ec4e8b.jpg?v=1715457491"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2725_Safari_e4efc7b3-601b-499c-a090-778d63ec4e8b.jpg?v=1715457491","width":400},{"alt":null,"id":24469325348927,"position":2,"preview_image":{"aspect_ratio":1.0,"height":237,"width":237,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_1e618545-cc30-4b65-9517-5f4d32bc2a94.jpg?v=1715457491"},"aspect_ratio":1.0,"height":237,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_1e618545-cc30-4b65-9517-5f4d32bc2a94.jpg?v=1715457491","width":237}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - S-2725 Safari
€7.50
PRODUCT DESCRIPTION Mayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals "bloom" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow a...
{"id":559962161215,"title":"Mayco – Cone 06 - S-2726 Cheetah","handle":"mayco-s2726","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-19T17:43:23-05:00","created_at":"2018-03-19T17:43:24-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06 S Crystalites Glazes","tags":["discount20","Glaze Line_Mayco (S) Crystalites"],"price":750,"price_min":750,"price_max":2215,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823732699199,"title":"4oz. - Stock Item, Normally ships in one business day","option1":"4oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S27264","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2726 Cheetah - 4oz. - Stock Item, Normally ships in one business day","public_title":"4oz. - Stock Item, Normally ships in one business day","options":["4oz. - Stock Item, Normally ships in one business day"],"price":750,"weight":227,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823732731967,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S2726P","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2726 Cheetah - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2215,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2726_Cheetah_1cdfd334-cba2-48bc-ad25-5bfca17fcaa8.jpg?v=1715457496","\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_1a76e5b8-a496-4309-a538-5f88bba818e8.jpg?v=1715457496"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2726_Cheetah_1cdfd334-cba2-48bc-ad25-5bfca17fcaa8.jpg?v=1715457496","options":["Size"],"media":[{"alt":null,"id":24469325479999,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2726_Cheetah_1cdfd334-cba2-48bc-ad25-5bfca17fcaa8.jpg?v=1715457496"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2726_Cheetah_1cdfd334-cba2-48bc-ad25-5bfca17fcaa8.jpg?v=1715457496","width":400},{"alt":null,"id":24469325512767,"position":2,"preview_image":{"aspect_ratio":1.0,"height":237,"width":237,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_1a76e5b8-a496-4309-a538-5f88bba818e8.jpg?v=1715457496"},"aspect_ratio":1.0,"height":237,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_1a76e5b8-a496-4309-a538-5f88bba818e8.jpg?v=1715457496","width":237}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - S-2726 Cheetah
€7.50
PRODUCT DESCRIPTION Mayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals "bloom" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow a...
{"id":559962193983,"title":"Mayco – Cone 06 - S-2727 Poppy Fields","handle":"mayco-s2727","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-19T17:43:25-05:00","created_at":"2018-03-19T17:43:26-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06 S Crystalites Glazes","tags":["discount20","Glaze Line_Mayco (S) Crystalites"],"price":750,"price_min":750,"price_max":2215,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823733092415,"title":"4oz. - Stock Item, Normally ships in one business day","option1":"4oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S27274","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2727 Poppy Fields - 4oz. - Stock Item, Normally ships in one business day","public_title":"4oz. - Stock Item, Normally ships in one business day","options":["4oz. - Stock Item, Normally ships in one business day"],"price":750,"weight":227,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823733125183,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S2727P","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2727 Poppy Fields - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2215,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2727_Poppy_Fields_efe3fbbc-cc70-4ea0-bfe8-8b31cba1b82f.jpg?v=1715457502","\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_edea7d1b-cbca-400e-858d-4b528750d6fa.jpg?v=1715457502"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2727_Poppy_Fields_efe3fbbc-cc70-4ea0-bfe8-8b31cba1b82f.jpg?v=1715457502","options":["Size"],"media":[{"alt":null,"id":24469325643839,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2727_Poppy_Fields_efe3fbbc-cc70-4ea0-bfe8-8b31cba1b82f.jpg?v=1715457502"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2727_Poppy_Fields_efe3fbbc-cc70-4ea0-bfe8-8b31cba1b82f.jpg?v=1715457502","width":400},{"alt":null,"id":24469325676607,"position":2,"preview_image":{"aspect_ratio":1.0,"height":237,"width":237,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_edea7d1b-cbca-400e-858d-4b528750d6fa.jpg?v=1715457502"},"aspect_ratio":1.0,"height":237,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_edea7d1b-cbca-400e-858d-4b528750d6fa.jpg?v=1715457502","width":237}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - S-2727 Poppy Fields
€7.50
PRODUCT DESCRIPTION Mayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals "bloom" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow a...
{"id":559962226751,"title":"Mayco – Cone 06 - S-2729 Citrus Splash","handle":"mayco-s2729","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-19T17:43:27-05:00","created_at":"2018-03-19T17:43:28-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06 S Crystalites Glazes","tags":["discount20","Glaze Line_Mayco (S) Crystalites"],"price":750,"price_min":750,"price_max":2215,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823733485631,"title":"4oz. - Stock Item, Normally ships in one business day","option1":"4oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S27294","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2729 Citrus Splash - 4oz. - Stock Item, Normally ships in one business day","public_title":"4oz. - Stock Item, Normally ships in one business day","options":["4oz. - Stock Item, Normally ships in one business day"],"price":750,"weight":227,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823733518399,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S2729P","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2729 Citrus Splash - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2215,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2729_Citrus_Splash_869bd213-6801-4d7f-a7cd-c3354ca3b9e3.jpg?v=1715457508","\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_9f7a94e4-2445-4209-8eb6-6d1559bfc196.jpg?v=1715457508"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2729_Citrus_Splash_869bd213-6801-4d7f-a7cd-c3354ca3b9e3.jpg?v=1715457508","options":["Size"],"media":[{"alt":null,"id":24469325807679,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2729_Citrus_Splash_869bd213-6801-4d7f-a7cd-c3354ca3b9e3.jpg?v=1715457508"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2729_Citrus_Splash_869bd213-6801-4d7f-a7cd-c3354ca3b9e3.jpg?v=1715457508","width":400},{"alt":null,"id":24469325840447,"position":2,"preview_image":{"aspect_ratio":1.0,"height":237,"width":237,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_9f7a94e4-2445-4209-8eb6-6d1559bfc196.jpg?v=1715457508"},"aspect_ratio":1.0,"height":237,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_9f7a94e4-2445-4209-8eb6-6d1559bfc196.jpg?v=1715457508","width":237}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - S-2729 Citrus Splash
€7.50
PRODUCT DESCRIPTION Mayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals "bloom" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow a...
{"id":559962292287,"title":"Mayco – Cone 06 - S-2731 Kaboom","handle":"mayco-s2731","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-19T17:43:29-05:00","created_at":"2018-03-19T17:43:30-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06 S Crystalites Glazes","tags":["discount20","Glaze Line_Mayco (S) Crystalites"],"price":750,"price_min":750,"price_max":2215,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823733878847,"title":"4oz. - Stock Item, Normally ships in one business day","option1":"4oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S27314","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2731 Kaboom - 4oz. - Stock Item, Normally ships in one business day","public_title":"4oz. - Stock Item, Normally ships in one business day","options":["4oz. - Stock Item, Normally ships in one business day"],"price":750,"weight":227,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823733911615,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"S2731P","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - S-2731 Kaboom - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2215,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2731_Kaboom_067c16c6-8efe-4c10-b391-1da9976a7570.jpg?v=1715457513","\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_e0b656cb-5100-40e1-b843-74aa755394eb.jpg?v=1715457513"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2731_Kaboom_067c16c6-8efe-4c10-b391-1da9976a7570.jpg?v=1715457513","options":["Size"],"media":[{"alt":null,"id":24469325971519,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2731_Kaboom_067c16c6-8efe-4c10-b391-1da9976a7570.jpg?v=1715457513"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/S2731_Kaboom_067c16c6-8efe-4c10-b391-1da9976a7570.jpg?v=1715457513","width":400},{"alt":null,"id":24469326004287,"position":2,"preview_image":{"aspect_ratio":1.0,"height":237,"width":237,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_e0b656cb-5100-40e1-b843-74aa755394eb.jpg?v=1715457513"},"aspect_ratio":1.0,"height":237,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/non_toxic_e0b656cb-5100-40e1-b843-74aa755394eb.jpg?v=1715457513","width":237}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals \"bloom\" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow and movement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSome qualities of Mayco's Crystal glazes include:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06; cone 6 and cone 10 firings can yield interesting results.\u003cbr\u003e \u003cstrong\u003eFree Flowing Formula\u003c\/strong\u003e - allows crystals to blossom or develop into colorful flowing arrays during the firing\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eNon-Toxic\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003cbr\u003e \u003c\/strong\u003e\u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake well prior to each application coat.\u003c\/strong\u003e The reason for this recommendation is that the crystals will settle to the bottom of the jar in a short period of time. If you notice the crystals settling during an application you can either dip your brush to the bottom of the jar to re-dispense or attach the lid and shake vigorously.\u003c\/p\u003e \u003cp\u003eDuring the application of the third coat of glaze you may find it necessary to re-distribute crystals, or add crystals, on your piece to assure balanced coverage. Use your brush to push crystals onto thinly covered areas or dip your brush into the jar and gather crystals onto it, then \"pat\" them on the sparsely covered areas.\u003c\/p\u003e \u003cp\u003eWe recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush, to apply crystal glazes. The fan brush may help more in the even disbursement of the crystals, thus creating a more pleasing pattern in the fired glaze.\u003c\/p\u003e \u003cp\u003eBecause of the flowing nature of the base glaze and the crystals we suggest tapering off the number of crystals applied to the bottom third of vertical piece. Glaze and crystals could run off the piece or gather at the base and form unsightly lumps. Similarly horizontal pieces, such as a plate, could cause the glaze to pool excessively if crystals are too heavily gathered on sloped section of the piece.\u003c\/p\u003e \u003cp\u003eCrystalites™ and Jungle Gems™, were designed to fire to cone 06. Higher temperture firings will change the colors from cone 06 results and movement and flow WILL increase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh Fire Potential\u003c\/strong\u003e\u003cbr\u003e Our crystal glazes can add excitement and interesting blending effects when fired to higher temperatures.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What advice to do have for firing Crystal glazes at higher temperatures?\u003c\/strong\u003e\u003cbr\u003e A: Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are some of the ways I can use Crystal glazes in my design work?\u003c\/strong\u003e\u003cbr\u003e A: Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Your label states that Crystalites™ and Jungle Gems™are \"Food Safe\", yet you also include the statement \"May not be suitable for food surfaces due to surface characteristics\"?\u003c\/strong\u003e\u003cbr\u003e A: Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are \"leach tests\"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as \"Food Safe.\"\u003c\/p\u003e \u003cp\u003eGlazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I mix leftover crystals into other glazes?\u003c\/strong\u003e\u003cbr\u003e A: Yes. Foundations Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - S-2731 Kaboom
€7.50
PRODUCT DESCRIPTION Mayco's crystal glazes, Crystalites™ and Jungle Gems™, are non-toxic gloss glazes that contain glass frit crystals and specks that melt during the firing process. As these crystals "bloom" and spread they produce dramatic, colorful effects. Our crystal glazes feature a fluid base glaze which allows for greater crystal flow a...
{"id":558200520767,"title":"Mayco – Cone 06 - SC-1 Pink-A-Boo","handle":"mayco-sc1","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-18T17:45:14-05:00","created_at":"2018-03-18T17:45:15-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823686332479,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC1-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-1 Pink-A-Boo - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823686365247,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC1-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-1 Pink-A-Boo - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823686398015,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC1p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-1 Pink-A-Boo - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc1_aa5a6806-24eb-4b3e-8a59-825b53606758.jpg?v=1715456039","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_f144f347-65db-4579-ac1e-1d64f7f05310.jpg?v=1715456039","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_5ef18772-f714-449d-99f0-bb8b2f3e4056.jpg?v=1715456039","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_c6bc12d9-7524-45cd-9563-d0e25778e6f0.jpg?v=1715456039"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc1_aa5a6806-24eb-4b3e-8a59-825b53606758.jpg?v=1715456039","options":["Size"],"media":[{"alt":null,"id":24469276196927,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc1_aa5a6806-24eb-4b3e-8a59-825b53606758.jpg?v=1715456039"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc1_aa5a6806-24eb-4b3e-8a59-825b53606758.jpg?v=1715456039","width":400},{"alt":null,"id":24469276229695,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_f144f347-65db-4579-ac1e-1d64f7f05310.jpg?v=1715456039"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_f144f347-65db-4579-ac1e-1d64f7f05310.jpg?v=1715456039","width":160},{"alt":null,"id":24469276262463,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_5ef18772-f714-449d-99f0-bb8b2f3e4056.jpg?v=1715456039"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_5ef18772-f714-449d-99f0-bb8b2f3e4056.jpg?v=1715456039","width":100},{"alt":null,"id":24469276295231,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_c6bc12d9-7524-45cd-9563-d0e25778e6f0.jpg?v=1715456039"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_c6bc12d9-7524-45cd-9563-d0e25778e6f0.jpg?v=1715456039","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-1 Pink-A-Boo
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":558200913983,"title":"Mayco – Cone 06 - SC-10 Teal Next Time","handle":"mayco-sc10","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-18T17:45:26-05:00","created_at":"2018-03-18T17:45:27-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823688560703,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC10-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-10 Teal Next Time - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823688593471,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC10-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-10 Teal Next Time - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823688626239,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC10p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-10 Teal Next Time - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc10_3976c8ba-2bac-49be-8197-413f004b5d25.jpg?v=1715456110","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_1ab0dd19-9b5e-499e-9184-94a113f7accd.jpg?v=1715456110","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_ec39a660-5a81-47b2-bcb0-4bc40d5dd2d8.jpg?v=1715456110","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_6b711cc7-ad5e-40b0-ba13-64e638f2ee31.jpg?v=1715456110"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc10_3976c8ba-2bac-49be-8197-413f004b5d25.jpg?v=1715456110","options":["Size"],"media":[{"alt":null,"id":24469279375423,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc10_3976c8ba-2bac-49be-8197-413f004b5d25.jpg?v=1715456110"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc10_3976c8ba-2bac-49be-8197-413f004b5d25.jpg?v=1715456110","width":400},{"alt":null,"id":24469279408191,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_1ab0dd19-9b5e-499e-9184-94a113f7accd.jpg?v=1715456110"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_1ab0dd19-9b5e-499e-9184-94a113f7accd.jpg?v=1715456110","width":160},{"alt":null,"id":24469279440959,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_ec39a660-5a81-47b2-bcb0-4bc40d5dd2d8.jpg?v=1715456110"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_ec39a660-5a81-47b2-bcb0-4bc40d5dd2d8.jpg?v=1715456110","width":100},{"alt":null,"id":24469279473727,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_6b711cc7-ad5e-40b0-ba13-64e638f2ee31.jpg?v=1715456110"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_6b711cc7-ad5e-40b0-ba13-64e638f2ee31.jpg?v=1715456110","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-10 Teal Next Time
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":7197793222719,"title":"Mayco – Cone 06 - SC-100 Makin Me Blush","handle":"mayco-sc100","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2023-06-30T12:27:00-05:00","created_at":"2023-06-30T12:27:04-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823704682559,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC100-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-100 Makin Me Blush - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823704715327,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC100-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-100 Makin Me Blush - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823704748095,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC100p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-100 Makin Me Blush - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/sc-100_2ac9060b-ce45-4c02-b934-8ee2ceedcb0e.jpg?v=1715456707","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_ca537b70-1b81-41f2-9c3b-df5cfb24e334.jpg?v=1715456707","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_2f01e702-d6d7-48a0-89d2-86b6307e405f.jpg?v=1715456707","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_8e369faf-2c2c-412c-bcca-7614995878b2.jpg?v=1715456707"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/sc-100_2ac9060b-ce45-4c02-b934-8ee2ceedcb0e.jpg?v=1715456707","options":["Size"],"media":[{"alt":null,"id":24469299298367,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1080,"width":1080,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/sc-100_2ac9060b-ce45-4c02-b934-8ee2ceedcb0e.jpg?v=1715456707"},"aspect_ratio":1.0,"height":1080,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/sc-100_2ac9060b-ce45-4c02-b934-8ee2ceedcb0e.jpg?v=1715456707","width":1080},{"alt":null,"id":24469299331135,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_ca537b70-1b81-41f2-9c3b-df5cfb24e334.jpg?v=1715456707"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_ca537b70-1b81-41f2-9c3b-df5cfb24e334.jpg?v=1715456707","width":160},{"alt":null,"id":24469299363903,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_2f01e702-d6d7-48a0-89d2-86b6307e405f.jpg?v=1715456707"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_2f01e702-d6d7-48a0-89d2-86b6307e405f.jpg?v=1715456707","width":100},{"alt":null,"id":24469299396671,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_8e369faf-2c2c-412c-bcca-7614995878b2.jpg?v=1715456707"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_8e369faf-2c2c-412c-bcca-7614995878b2.jpg?v=1715456707","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-100 Makin Me Blush
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":7197793255487,"title":"Mayco – Cone 06 - SC-101 Spruce It Up","handle":"mayco-sc101","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2023-06-30T12:27:05-05:00","created_at":"2023-06-30T12:27:09-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823704846399,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC101-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-101 Spruce It Up - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823704879167,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC101-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-101 Spruce It Up - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823704911935,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC101p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-101 Spruce It Up - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/sc-101_40567c18-b86d-4bc2-b30d-8fde523ce6c6.jpg?v=1715456715","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_29af490c-068d-4e96-bd8c-7272ee4852d8.jpg?v=1715456715","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_37968c55-19dc-499d-9956-3d4aa75018c3.jpg?v=1715456715","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_8131d111-3cf4-454d-9ade-f37caa7154b7.jpg?v=1715456716"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/sc-101_40567c18-b86d-4bc2-b30d-8fde523ce6c6.jpg?v=1715456715","options":["Size"],"media":[{"alt":null,"id":24469299560511,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1080,"width":1080,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/sc-101_40567c18-b86d-4bc2-b30d-8fde523ce6c6.jpg?v=1715456715"},"aspect_ratio":1.0,"height":1080,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/sc-101_40567c18-b86d-4bc2-b30d-8fde523ce6c6.jpg?v=1715456715","width":1080},{"alt":null,"id":24469299593279,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_29af490c-068d-4e96-bd8c-7272ee4852d8.jpg?v=1715456715"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_29af490c-068d-4e96-bd8c-7272ee4852d8.jpg?v=1715456715","width":160},{"alt":null,"id":24469299626047,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_37968c55-19dc-499d-9956-3d4aa75018c3.jpg?v=1715456715"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_37968c55-19dc-499d-9956-3d4aa75018c3.jpg?v=1715456715","width":100},{"alt":null,"id":24469299658815,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_8131d111-3cf4-454d-9ade-f37caa7154b7.jpg?v=1715456716"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_8131d111-3cf4-454d-9ade-f37caa7154b7.jpg?v=1715456716","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-101 Spruce It Up
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":7197793288255,"title":"Mayco – Cone 06 - SC-102 Just Peachy","handle":"mayco-sc102","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2023-06-30T12:27:10-05:00","created_at":"2023-06-30T12:27:14-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823705010239,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC102-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-102 Just Peachy - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823705043007,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC102-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-102 Just Peachy - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823705075775,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC102p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-102 Just Peachy - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/sc-102_afb1f3f9-817d-4ee0-8a0f-02880accb7b3.jpg?v=1715456723","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_7fdc3a54-a4e1-4472-9b40-7434ec248de4.jpg?v=1715456723","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_3afa90d5-53b7-485b-821d-133aad3e5736.jpg?v=1715456723","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_5b3d6d75-b43f-4ed6-b7e6-221c72fac148.jpg?v=1715456723"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/sc-102_afb1f3f9-817d-4ee0-8a0f-02880accb7b3.jpg?v=1715456723","options":["Size"],"media":[{"alt":null,"id":24469299822655,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1080,"width":1080,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/sc-102_afb1f3f9-817d-4ee0-8a0f-02880accb7b3.jpg?v=1715456723"},"aspect_ratio":1.0,"height":1080,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/sc-102_afb1f3f9-817d-4ee0-8a0f-02880accb7b3.jpg?v=1715456723","width":1080},{"alt":null,"id":24469299855423,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_7fdc3a54-a4e1-4472-9b40-7434ec248de4.jpg?v=1715456723"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_7fdc3a54-a4e1-4472-9b40-7434ec248de4.jpg?v=1715456723","width":160},{"alt":null,"id":24469299888191,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_3afa90d5-53b7-485b-821d-133aad3e5736.jpg?v=1715456723"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_3afa90d5-53b7-485b-821d-133aad3e5736.jpg?v=1715456723","width":100},{"alt":null,"id":24469299920959,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_5b3d6d75-b43f-4ed6-b7e6-221c72fac148.jpg?v=1715456723"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_5b3d6d75-b43f-4ed6-b7e6-221c72fac148.jpg?v=1715456723","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-102 Just Peachy
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":7197793386559,"title":"Mayco – Cone 06 - SC-103 Lavendear","handle":"mayco-sc103","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2023-06-30T12:27:17-05:00","created_at":"2023-06-30T12:27:20-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823705108543,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC103-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-103 Lavendear - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823705141311,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC103-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-103 Lavendear - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823705174079,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC103p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-103 Lavendear - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/sc-103_0e0c8e3b-f0e4-4b80-8e4a-ac2acb31a7cf.jpg?v=1715456731","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_00f4ac21-6052-4b90-87dc-ca6885bc0574.jpg?v=1715456731","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_c2970e50-baf7-43f7-b9dc-ac2ce5bfd89e.jpg?v=1715456731","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_2267de6d-161d-43d9-8ca0-8172c396a39f.jpg?v=1715456732"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/sc-103_0e0c8e3b-f0e4-4b80-8e4a-ac2acb31a7cf.jpg?v=1715456731","options":["Size"],"media":[{"alt":null,"id":24469299953727,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1080,"width":1080,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/sc-103_0e0c8e3b-f0e4-4b80-8e4a-ac2acb31a7cf.jpg?v=1715456731"},"aspect_ratio":1.0,"height":1080,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/sc-103_0e0c8e3b-f0e4-4b80-8e4a-ac2acb31a7cf.jpg?v=1715456731","width":1080},{"alt":null,"id":24469299986495,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_00f4ac21-6052-4b90-87dc-ca6885bc0574.jpg?v=1715456731"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_00f4ac21-6052-4b90-87dc-ca6885bc0574.jpg?v=1715456731","width":160},{"alt":null,"id":24469300019263,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_c2970e50-baf7-43f7-b9dc-ac2ce5bfd89e.jpg?v=1715456731"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_c2970e50-baf7-43f7-b9dc-ac2ce5bfd89e.jpg?v=1715456731","width":100},{"alt":null,"id":24469300052031,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_2267de6d-161d-43d9-8ca0-8172c396a39f.jpg?v=1715456732"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_2267de6d-161d-43d9-8ca0-8172c396a39f.jpg?v=1715456732","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-103 Lavendear
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":7197793419327,"title":"Mayco – Cone 06 - SC-104 Grape Expectations","handle":"mayco-sc104","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2023-06-30T12:27:22-05:00","created_at":"2023-06-30T12:27:26-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823705436223,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC104-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-104 Grape Expectations - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823705468991,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC104-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-104 Grape Expectations - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823705501759,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC104p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-104 Grape Expectations - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/sc-104_f805e6c9-589d-45bb-a7dc-4efe1b0b9d7e.jpg?v=1715456740","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_1f7aa7c2-e8cb-4463-84e6-61cb2d5adfdf.jpg?v=1715456740","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_a6892ef0-380b-419f-aa13-08124aff2c92.jpg?v=1715456740","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_146f6bbd-d70e-47ee-b0d0-932f35f327cf.jpg?v=1715456740"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/sc-104_f805e6c9-589d-45bb-a7dc-4efe1b0b9d7e.jpg?v=1715456740","options":["Size"],"media":[{"alt":null,"id":24469300412479,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1080,"width":1080,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/sc-104_f805e6c9-589d-45bb-a7dc-4efe1b0b9d7e.jpg?v=1715456740"},"aspect_ratio":1.0,"height":1080,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/sc-104_f805e6c9-589d-45bb-a7dc-4efe1b0b9d7e.jpg?v=1715456740","width":1080},{"alt":null,"id":24469300445247,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_1f7aa7c2-e8cb-4463-84e6-61cb2d5adfdf.jpg?v=1715456740"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_1f7aa7c2-e8cb-4463-84e6-61cb2d5adfdf.jpg?v=1715456740","width":160},{"alt":null,"id":24469300478015,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_a6892ef0-380b-419f-aa13-08124aff2c92.jpg?v=1715456740"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_a6892ef0-380b-419f-aa13-08124aff2c92.jpg?v=1715456740","width":100},{"alt":null,"id":24469300510783,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_146f6bbd-d70e-47ee-b0d0-932f35f327cf.jpg?v=1715456740"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_146f6bbd-d70e-47ee-b0d0-932f35f327cf.jpg?v=1715456740","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-104 Grape Expectations
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":558200946751,"title":"Mayco – Cone 06 - SC-11 Blue Yonder","handle":"mayco-sc11","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-18T17:45:27-05:00","created_at":"2018-03-18T17:45:28-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":12700,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823688790079,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC11-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-11 Blue Yonder - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823688822847,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC11-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-11 Blue Yonder - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823688855615,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC11p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-11 Blue Yonder - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":7035625635903,"title":"Gallon - Special Order, Normally ships in 2-3 business days","option1":"Gallon - Special Order, Normally ships in 2-3 business days","option2":null,"option3":null,"sku":"SC11g","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-11 Blue Yonder - Gallon - Special Order, Normally ships in 2-3 business days","public_title":"Gallon - Special Order, Normally ships in 2-3 business days","options":["Gallon - Special Order, Normally ships in 2-3 business days"],"price":12700,"weight":7264,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc11_8fd948bc-ab15-4db7-8328-f4b9057913a1.jpg?v=1715456118","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_fa745fe2-cb13-4bfa-a22b-617adf6f8ea1.jpg?v=1715456118","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_b6c2e51c-d139-4080-9e47-8d9511466b3a.jpg?v=1715456118","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_ce129727-1d3a-4dec-bdbf-503d872cbc4e.jpg?v=1715456118"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc11_8fd948bc-ab15-4db7-8328-f4b9057913a1.jpg?v=1715456118","options":["Size"],"media":[{"alt":null,"id":24469279670335,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc11_8fd948bc-ab15-4db7-8328-f4b9057913a1.jpg?v=1715456118"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc11_8fd948bc-ab15-4db7-8328-f4b9057913a1.jpg?v=1715456118","width":400},{"alt":null,"id":24469279703103,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_fa745fe2-cb13-4bfa-a22b-617adf6f8ea1.jpg?v=1715456118"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_fa745fe2-cb13-4bfa-a22b-617adf6f8ea1.jpg?v=1715456118","width":160},{"alt":null,"id":24469279735871,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_b6c2e51c-d139-4080-9e47-8d9511466b3a.jpg?v=1715456118"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_b6c2e51c-d139-4080-9e47-8d9511466b3a.jpg?v=1715456118","width":100},{"alt":null,"id":24469279768639,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_ce129727-1d3a-4dec-bdbf-503d872cbc4e.jpg?v=1715456118"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_ce129727-1d3a-4dec-bdbf-503d872cbc4e.jpg?v=1715456118","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-11 Blue Yonder
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":558200979519,"title":"Mayco – Cone 06 - SC-12 Moody Blue","handle":"mayco-sc12","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-18T17:45:28-05:00","created_at":"2018-03-18T17:45:29-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":12700,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823688921151,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC12-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-12 Moody Blue - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823688953919,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC12-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-12 Moody Blue - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823688986687,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC12p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-12 Moody Blue - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":7035625865279,"title":"Gallon - Special Order, Normally ships in 2-3 business days","option1":"Gallon - Special Order, Normally ships in 2-3 business days","option2":null,"option3":null,"sku":"SC12g","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-12 Moody Blue - Gallon - Special Order, Normally ships in 2-3 business days","public_title":"Gallon - Special Order, Normally ships in 2-3 business days","options":["Gallon - Special Order, Normally ships in 2-3 business days"],"price":12700,"weight":7264,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc12_8e67b50d-0dbc-45ad-ace3-b5736fa1ed94.jpg?v=1715456126","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_fcd6a93d-46d2-4602-8361-cb8210658ffd.jpg?v=1715456126","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_1a735b1d-3253-4eba-8d32-547de8128fe5.jpg?v=1715456126","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_75a9b373-b343-4fe7-87f9-025ab394edc0.jpg?v=1715456126"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc12_8e67b50d-0dbc-45ad-ace3-b5736fa1ed94.jpg?v=1715456126","options":["Size"],"media":[{"alt":null,"id":24469279866943,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc12_8e67b50d-0dbc-45ad-ace3-b5736fa1ed94.jpg?v=1715456126"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc12_8e67b50d-0dbc-45ad-ace3-b5736fa1ed94.jpg?v=1715456126","width":400},{"alt":null,"id":24469279932479,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_fcd6a93d-46d2-4602-8361-cb8210658ffd.jpg?v=1715456126"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_fcd6a93d-46d2-4602-8361-cb8210658ffd.jpg?v=1715456126","width":160},{"alt":null,"id":24469279965247,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_1a735b1d-3253-4eba-8d32-547de8128fe5.jpg?v=1715456126"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_1a735b1d-3253-4eba-8d32-547de8128fe5.jpg?v=1715456126","width":100},{"alt":null,"id":24469279998015,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_75a9b373-b343-4fe7-87f9-025ab394edc0.jpg?v=1715456126"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_75a9b373-b343-4fe7-87f9-025ab394edc0.jpg?v=1715456126","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-12 Moody Blue
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":558201012287,"title":"Mayco – Cone 06 - SC-13 Grapel","handle":"mayco-sc13","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-18T17:45:29-05:00","created_at":"2018-03-18T17:45:30-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823689019455,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC13-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-13 Grapel - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823689052223,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC13-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-13 Grapel - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823689084991,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC13p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-13 Grapel - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc13_75d50673-1c99-4634-b1bb-393cbe397aaa.jpg?v=1715456135","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_1a019652-224f-4cb4-876b-f478dbbb77d1.jpg?v=1715456135","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_30bb7979-1963-4ef3-bd98-fc3728333bb3.jpg?v=1715456135","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_917d3c6c-6fb8-4f23-bbec-6df2823af312.jpg?v=1715456135"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc13_75d50673-1c99-4634-b1bb-393cbe397aaa.jpg?v=1715456135","options":["Size"],"media":[{"alt":null,"id":24469280063551,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc13_75d50673-1c99-4634-b1bb-393cbe397aaa.jpg?v=1715456135"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc13_75d50673-1c99-4634-b1bb-393cbe397aaa.jpg?v=1715456135","width":400},{"alt":null,"id":24469280096319,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_1a019652-224f-4cb4-876b-f478dbbb77d1.jpg?v=1715456135"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_1a019652-224f-4cb4-876b-f478dbbb77d1.jpg?v=1715456135","width":160},{"alt":null,"id":24469280129087,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_30bb7979-1963-4ef3-bd98-fc3728333bb3.jpg?v=1715456135"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_30bb7979-1963-4ef3-bd98-fc3728333bb3.jpg?v=1715456135","width":100},{"alt":null,"id":24469280161855,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_917d3c6c-6fb8-4f23-bbec-6df2823af312.jpg?v=1715456135"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_917d3c6c-6fb8-4f23-bbec-6df2823af312.jpg?v=1715456135","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-13 Grapel
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":558201045055,"title":"Mayco – Cone 06 - SC-14 Java Bean","handle":"mayco-sc14","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-18T17:45:30-05:00","created_at":"2018-03-18T17:45:31-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823689117759,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC14-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-14 Java Bean - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823689150527,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC14-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-14 Java Bean - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823689183295,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC14p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-14 Java Bean - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc14_876fc635-0b42-4ced-b4fd-36f4fb71d705.jpg?v=1715456144","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_d7c35c26-f4ed-4573-af66-d4481cd47fae.jpg?v=1715456144","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_35db4fab-95de-414c-bbf3-a1a7a27a7448.jpg?v=1715456144","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_863d00b5-d724-4748-a8c9-bc59c71de70a.jpg?v=1715456144"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc14_876fc635-0b42-4ced-b4fd-36f4fb71d705.jpg?v=1715456144","options":["Size"],"media":[{"alt":null,"id":24469280260159,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc14_876fc635-0b42-4ced-b4fd-36f4fb71d705.jpg?v=1715456144"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc14_876fc635-0b42-4ced-b4fd-36f4fb71d705.jpg?v=1715456144","width":400},{"alt":null,"id":24469280292927,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_d7c35c26-f4ed-4573-af66-d4481cd47fae.jpg?v=1715456144"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_d7c35c26-f4ed-4573-af66-d4481cd47fae.jpg?v=1715456144","width":160},{"alt":null,"id":24469280325695,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_35db4fab-95de-414c-bbf3-a1a7a27a7448.jpg?v=1715456144"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_35db4fab-95de-414c-bbf3-a1a7a27a7448.jpg?v=1715456144","width":100},{"alt":null,"id":24469280358463,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_863d00b5-d724-4748-a8c9-bc59c71de70a.jpg?v=1715456144"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_863d00b5-d724-4748-a8c9-bc59c71de70a.jpg?v=1715456144","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-14 Java Bean
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":558201077823,"title":"Mayco – Cone 06 - SC-15 Tuxedo","handle":"mayco-sc15","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-18T17:45:31-05:00","created_at":"2018-03-18T17:45:31-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":12700,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823689445439,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC15-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-15 Tuxedo - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823689510975,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC15-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-15 Tuxedo - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823689543743,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC15p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-15 Tuxedo - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":7035626258495,"title":"Gallon - Special Order, Normally ships in 2-3 business days","option1":"Gallon - Special Order, Normally ships in 2-3 business days","option2":null,"option3":null,"sku":"SC15g","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-15 Tuxedo - Gallon - Special Order, Normally ships in 2-3 business days","public_title":"Gallon - Special Order, Normally ships in 2-3 business days","options":["Gallon - Special Order, Normally ships in 2-3 business days"],"price":12700,"weight":7264,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc15_1efde82f-36f8-4ae1-8dab-33b8ceba6599.jpg?v=1715456153","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_69e6cc97-723c-41ba-8abc-6807ad1aa1e9.jpg?v=1715456153","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_e15d3b17-ed91-4cd3-a10b-c11d312abbc1.jpg?v=1715456153","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_5b795537-a3d4-48b1-9f98-4a142d9d08eb.jpg?v=1715456153"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc15_1efde82f-36f8-4ae1-8dab-33b8ceba6599.jpg?v=1715456153","options":["Size"],"media":[{"alt":null,"id":24469280391231,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc15_1efde82f-36f8-4ae1-8dab-33b8ceba6599.jpg?v=1715456153"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc15_1efde82f-36f8-4ae1-8dab-33b8ceba6599.jpg?v=1715456153","width":400},{"alt":null,"id":24469280423999,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_69e6cc97-723c-41ba-8abc-6807ad1aa1e9.jpg?v=1715456153"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_69e6cc97-723c-41ba-8abc-6807ad1aa1e9.jpg?v=1715456153","width":160},{"alt":null,"id":24469280456767,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_e15d3b17-ed91-4cd3-a10b-c11d312abbc1.jpg?v=1715456153"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_e15d3b17-ed91-4cd3-a10b-c11d312abbc1.jpg?v=1715456153","width":100},{"alt":null,"id":24469280948287,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_5b795537-a3d4-48b1-9f98-4a142d9d08eb.jpg?v=1715456153"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_5b795537-a3d4-48b1-9f98-4a142d9d08eb.jpg?v=1715456153","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-15 Tuxedo
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":558201110591,"title":"Mayco – Cone 06 - SC-16 Cotton Tail","handle":"mayco-sc16","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-18T17:45:32-05:00","created_at":"2018-03-18T17:45:32-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":12700,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823689773119,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC16-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-16 Cotton Tail - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823689805887,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC16-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-16 Cotton Tail - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823689838655,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC16p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-16 Cotton Tail - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":7035626356799,"title":"Gallon - Special Order, Normally ships in 2-3 business days","option1":"Gallon - Special Order, Normally ships in 2-3 business days","option2":null,"option3":null,"sku":"SC16g","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-16 Cotton Tail - Gallon - Special Order, Normally ships in 2-3 business days","public_title":"Gallon - Special Order, Normally ships in 2-3 business days","options":["Gallon - Special Order, Normally ships in 2-3 business days"],"price":12700,"weight":7264,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc16_e9f5640e-320e-4f0e-a825-c476771684da.jpg?v=1715456161","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_fe5f3591-fa39-4b0c-b902-3a80a34e470b.jpg?v=1715456161","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_3e3a4a40-284a-456f-bbc9-d212487cf68e.jpg?v=1715456161","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_85dd72c6-568a-4626-8985-b5c530a6f1fb.jpg?v=1715456161"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc16_e9f5640e-320e-4f0e-a825-c476771684da.jpg?v=1715456161","options":["Size"],"media":[{"alt":null,"id":24469281013823,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc16_e9f5640e-320e-4f0e-a825-c476771684da.jpg?v=1715456161"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc16_e9f5640e-320e-4f0e-a825-c476771684da.jpg?v=1715456161","width":400},{"alt":null,"id":24469281046591,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_fe5f3591-fa39-4b0c-b902-3a80a34e470b.jpg?v=1715456161"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_fe5f3591-fa39-4b0c-b902-3a80a34e470b.jpg?v=1715456161","width":160},{"alt":null,"id":24469281079359,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_3e3a4a40-284a-456f-bbc9-d212487cf68e.jpg?v=1715456161"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_3e3a4a40-284a-456f-bbc9-d212487cf68e.jpg?v=1715456161","width":100},{"alt":null,"id":24469281112127,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_85dd72c6-568a-4626-8985-b5c530a6f1fb.jpg?v=1715456161"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_85dd72c6-568a-4626-8985-b5c530a6f1fb.jpg?v=1715456161","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-16 Cotton Tail
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":558201143359,"title":"Mayco – Cone 06 - SC-17 Cheeky Pinky","handle":"mayco-sc17","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-18T17:45:33-05:00","created_at":"2018-03-18T17:45:33-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823689871423,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC17-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-17 Cheeky Pinky - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823689904191,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC17-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-17 Cheeky Pinky - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823689936959,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC17p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-17 Cheeky Pinky - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc17_75b40a68-5817-4276-956e-4c84ef4cd7c1.jpg?v=1715456170","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_77439215-fc5e-4f51-a04d-5e9f51fd0351.jpg?v=1715456170","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_6fc0ced8-1502-4292-8e8c-d95375627cdf.jpg?v=1715456170","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_ea451914-502f-43c0-aede-ee8bd3df1b12.jpg?v=1715456170"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc17_75b40a68-5817-4276-956e-4c84ef4cd7c1.jpg?v=1715456170","options":["Size"],"media":[{"alt":null,"id":24469281177663,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc17_75b40a68-5817-4276-956e-4c84ef4cd7c1.jpg?v=1715456170"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc17_75b40a68-5817-4276-956e-4c84ef4cd7c1.jpg?v=1715456170","width":400},{"alt":null,"id":24469281210431,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_77439215-fc5e-4f51-a04d-5e9f51fd0351.jpg?v=1715456170"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_77439215-fc5e-4f51-a04d-5e9f51fd0351.jpg?v=1715456170","width":160},{"alt":null,"id":24469281243199,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_6fc0ced8-1502-4292-8e8c-d95375627cdf.jpg?v=1715456170"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_6fc0ced8-1502-4292-8e8c-d95375627cdf.jpg?v=1715456170","width":100},{"alt":null,"id":24469281275967,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_ea451914-502f-43c0-aede-ee8bd3df1b12.jpg?v=1715456170"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_ea451914-502f-43c0-aede-ee8bd3df1b12.jpg?v=1715456170","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-17 Cheeky Pinky
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":558201176127,"title":"Mayco – Cone 06 - SC-18 Rosey Posey","handle":"mayco-sc18","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-18T17:45:34-05:00","created_at":"2018-03-18T17:45:34-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823689969727,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC18-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-18 Rosey Posey - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823690002495,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC18-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-18 Rosey Posey - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823690035263,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC18p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-18 Rosey Posey - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc18_7ad890de-dd90-4b9a-baea-cd5596ae8021.jpg?v=1715456179","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_73cf9bd8-a525-4872-8731-c217c9eab37c.jpg?v=1715456179","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_a8fff098-edbe-448e-91f2-af35db7e1bbf.jpg?v=1715456179","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_04d4e2e2-e849-4da7-bc9d-81e5918f2f38.jpg?v=1715456179"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc18_7ad890de-dd90-4b9a-baea-cd5596ae8021.jpg?v=1715456179","options":["Size"],"media":[{"alt":null,"id":24469281308735,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc18_7ad890de-dd90-4b9a-baea-cd5596ae8021.jpg?v=1715456179"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc18_7ad890de-dd90-4b9a-baea-cd5596ae8021.jpg?v=1715456179","width":400},{"alt":null,"id":24469281341503,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_73cf9bd8-a525-4872-8731-c217c9eab37c.jpg?v=1715456179"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_73cf9bd8-a525-4872-8731-c217c9eab37c.jpg?v=1715456179","width":160},{"alt":null,"id":24469281374271,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_a8fff098-edbe-448e-91f2-af35db7e1bbf.jpg?v=1715456179"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_a8fff098-edbe-448e-91f2-af35db7e1bbf.jpg?v=1715456179","width":100},{"alt":null,"id":24469281407039,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_04d4e2e2-e849-4da7-bc9d-81e5918f2f38.jpg?v=1715456179"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_04d4e2e2-e849-4da7-bc9d-81e5918f2f38.jpg?v=1715456179","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-18 Rosey Posey
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":558200553535,"title":"Mayco – Cone 06 - SC-2 Melon-Choly","handle":"mayco-sc2","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-18T17:45:16-05:00","created_at":"2018-03-18T17:45:16-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823686463551,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC2-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-2 Melon-Choly - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823686496319,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC2-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-2 Melon-Choly - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823686529087,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC2p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-2 Melon-Choly - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc2_c66882eb-cb13-498c-bd23-1c44eb926406.jpg?v=1715456047","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_65b56499-43d9-411d-b491-6e1d36517b0c.jpg?v=1715456047","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_b43a15bc-6d0a-4fc1-8480-dc9a0d31716f.jpg?v=1715456047","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_3b3fa0c1-380e-45db-81ae-cd8ef02cbe13.jpg?v=1715456047"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc2_c66882eb-cb13-498c-bd23-1c44eb926406.jpg?v=1715456047","options":["Size"],"media":[{"alt":null,"id":24469276327999,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc2_c66882eb-cb13-498c-bd23-1c44eb926406.jpg?v=1715456047"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc2_c66882eb-cb13-498c-bd23-1c44eb926406.jpg?v=1715456047","width":400},{"alt":null,"id":24469276360767,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_65b56499-43d9-411d-b491-6e1d36517b0c.jpg?v=1715456047"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_65b56499-43d9-411d-b491-6e1d36517b0c.jpg?v=1715456047","width":160},{"alt":null,"id":24469276393535,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_b43a15bc-6d0a-4fc1-8480-dc9a0d31716f.jpg?v=1715456047"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_b43a15bc-6d0a-4fc1-8480-dc9a0d31716f.jpg?v=1715456047","width":100},{"alt":null,"id":24469276426303,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_3b3fa0c1-380e-45db-81ae-cd8ef02cbe13.jpg?v=1715456047"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_3b3fa0c1-380e-45db-81ae-cd8ef02cbe13.jpg?v=1715456047","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-2 Melon-Choly
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":558201208895,"title":"Mayco – Cone 06 - SC-20 Cashew Later","handle":"mayco-sc20","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-18T17:45:35-05:00","created_at":"2018-03-18T17:45:35-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823690494015,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC20-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-20 Cashew Later - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823690526783,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC20-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-20 Cashew Later - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823690559551,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC20p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-20 Cashew Later - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc20_4c1a52f4-9932-41a6-86f3-78b908d1b314.jpg?v=1715456190","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_e890496a-d338-4820-8c49-5f87de7b26f7.jpg?v=1715456190","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_5953d52a-c10d-4cca-a13c-b07021d5c2b0.jpg?v=1715456190","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_8e1c94c6-68f2-4c38-83a2-5b3d64360531.jpg?v=1715456190"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc20_4c1a52f4-9932-41a6-86f3-78b908d1b314.jpg?v=1715456190","options":["Size"],"media":[{"alt":null,"id":24469281931327,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc20_4c1a52f4-9932-41a6-86f3-78b908d1b314.jpg?v=1715456190"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc20_4c1a52f4-9932-41a6-86f3-78b908d1b314.jpg?v=1715456190","width":400},{"alt":null,"id":24469281964095,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_e890496a-d338-4820-8c49-5f87de7b26f7.jpg?v=1715456190"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_e890496a-d338-4820-8c49-5f87de7b26f7.jpg?v=1715456190","width":160},{"alt":null,"id":24469281996863,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_5953d52a-c10d-4cca-a13c-b07021d5c2b0.jpg?v=1715456190"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_5953d52a-c10d-4cca-a13c-b07021d5c2b0.jpg?v=1715456190","width":100},{"alt":null,"id":24469282029631,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_8e1c94c6-68f2-4c38-83a2-5b3d64360531.jpg?v=1715456190"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_8e1c94c6-68f2-4c38-83a2-5b3d64360531.jpg?v=1715456190","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-20 Cashew Later
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":558201274431,"title":"Mayco – Cone 06 - SC-23 Jack O'Lantern","handle":"mayco-sc23","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-18T17:45:36-05:00","created_at":"2018-03-18T17:45:37-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823690592319,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC23-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-23 Jack O'Lantern - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823690625087,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC23-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-23 Jack O'Lantern - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823690657855,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC23p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-23 Jack O'Lantern - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc23_da6c0685-5516-4cc6-82b4-c141d15a1e14.jpg?v=1715456201","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_cacada64-43d1-48db-a835-69e6b40a6396.jpg?v=1715456201","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_cb435b75-c2ae-40b2-b980-606abfe299f5.jpg?v=1715456201","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_79582946-c048-45af-a903-16da8479872d.jpg?v=1715456201"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc23_da6c0685-5516-4cc6-82b4-c141d15a1e14.jpg?v=1715456201","options":["Size"],"media":[{"alt":null,"id":24469282062399,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc23_da6c0685-5516-4cc6-82b4-c141d15a1e14.jpg?v=1715456201"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc23_da6c0685-5516-4cc6-82b4-c141d15a1e14.jpg?v=1715456201","width":400},{"alt":null,"id":24469282095167,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_cacada64-43d1-48db-a835-69e6b40a6396.jpg?v=1715456201"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_cacada64-43d1-48db-a835-69e6b40a6396.jpg?v=1715456201","width":160},{"alt":null,"id":24469282127935,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_cb435b75-c2ae-40b2-b980-606abfe299f5.jpg?v=1715456201"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_cb435b75-c2ae-40b2-b980-606abfe299f5.jpg?v=1715456201","width":100},{"alt":null,"id":24469282160703,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_79582946-c048-45af-a903-16da8479872d.jpg?v=1715456201"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_79582946-c048-45af-a903-16da8479872d.jpg?v=1715456201","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-23 Jack O'Lantern
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":558201307199,"title":"Mayco – Cone 06 - SC-24 Dandelion","handle":"mayco-sc24","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-18T17:45:38-05:00","created_at":"2018-03-18T17:45:38-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823690690623,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC24-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-24 Dandelion - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823690723391,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC24-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-24 Dandelion - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823690756159,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC24p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-24 Dandelion - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc24_c0356472-f0a4-4929-a88a-704d7f9ad345.jpg?v=1715456210","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_a8159e8a-bffd-486e-af97-aa83ae67ef95.jpg?v=1715456210","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_647a6774-b5a3-434d-a9b0-3be8a7fb0217.jpg?v=1715456210","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_67498479-fc6f-402f-b8d6-cbaf213e4d22.jpg?v=1715456210"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc24_c0356472-f0a4-4929-a88a-704d7f9ad345.jpg?v=1715456210","options":["Size"],"media":[{"alt":null,"id":24469282193471,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc24_c0356472-f0a4-4929-a88a-704d7f9ad345.jpg?v=1715456210"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc24_c0356472-f0a4-4929-a88a-704d7f9ad345.jpg?v=1715456210","width":400},{"alt":null,"id":24469282226239,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_a8159e8a-bffd-486e-af97-aa83ae67ef95.jpg?v=1715456210"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_a8159e8a-bffd-486e-af97-aa83ae67ef95.jpg?v=1715456210","width":160},{"alt":null,"id":24469282259007,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_647a6774-b5a3-434d-a9b0-3be8a7fb0217.jpg?v=1715456210"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_647a6774-b5a3-434d-a9b0-3be8a7fb0217.jpg?v=1715456210","width":100},{"alt":null,"id":24469282291775,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_67498479-fc6f-402f-b8d6-cbaf213e4d22.jpg?v=1715456210"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_67498479-fc6f-402f-b8d6-cbaf213e4d22.jpg?v=1715456210","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-24 Dandelion
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":558201339967,"title":"Mayco – Cone 06 - SC-25 Crackerjack Brown","handle":"mayco-sc25","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-18T17:45:38-05:00","created_at":"2018-03-18T17:45:39-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823690788927,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC25-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-25 Crackerjack Brown - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823690821695,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC25-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-25 Crackerjack Brown - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823690854463,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC25p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-25 Crackerjack Brown - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc25_1d8cb4b0-3b0d-419a-b5f7-5e020602abf0.jpg?v=1715456219","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_08073ced-74d8-4127-9cad-85412aec5ee3.jpg?v=1715456219","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_e4081483-3450-4ef7-b766-77f5fc0a293c.jpg?v=1715456219","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_0f082236-4f3e-4a20-bc13-e023b477fd0b.jpg?v=1715456219"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc25_1d8cb4b0-3b0d-419a-b5f7-5e020602abf0.jpg?v=1715456219","options":["Size"],"media":[{"alt":null,"id":24469282324543,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc25_1d8cb4b0-3b0d-419a-b5f7-5e020602abf0.jpg?v=1715456219"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc25_1d8cb4b0-3b0d-419a-b5f7-5e020602abf0.jpg?v=1715456219","width":400},{"alt":null,"id":24469282357311,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_08073ced-74d8-4127-9cad-85412aec5ee3.jpg?v=1715456219"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_08073ced-74d8-4127-9cad-85412aec5ee3.jpg?v=1715456219","width":160},{"alt":null,"id":24469282390079,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_e4081483-3450-4ef7-b766-77f5fc0a293c.jpg?v=1715456219"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_e4081483-3450-4ef7-b766-77f5fc0a293c.jpg?v=1715456219","width":100},{"alt":null,"id":24469282422847,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_0f082236-4f3e-4a20-bc13-e023b477fd0b.jpg?v=1715456219"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_0f082236-4f3e-4a20-bc13-e023b477fd0b.jpg?v=1715456219","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-25 Crackerjack Brown
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":558201372735,"title":"Mayco – Cone 06 - SC-26 Green Thumb","handle":"mayco-sc26","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-18T17:45:39-05:00","created_at":"2018-03-18T17:45:40-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823691313215,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC26-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-26 Green Thumb - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823691345983,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC26-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-26 Green Thumb - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823691378751,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC26p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-26 Green Thumb - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc26_065e1e54-d06b-4d88-8e31-4ebb81e586e3.jpg?v=1715456228","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_01606a38-c5ee-48d0-8e62-f413f1917cd2.jpg?v=1715456229","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_c61cb4f7-17b2-4abf-927f-16457ec60642.jpg?v=1715456229","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_daf511b8-b141-485f-b5ec-e1639a816717.jpg?v=1715456229"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc26_065e1e54-d06b-4d88-8e31-4ebb81e586e3.jpg?v=1715456228","options":["Size"],"media":[{"alt":null,"id":24469282979903,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc26_065e1e54-d06b-4d88-8e31-4ebb81e586e3.jpg?v=1715456228"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc26_065e1e54-d06b-4d88-8e31-4ebb81e586e3.jpg?v=1715456228","width":400},{"alt":null,"id":24469283012671,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_01606a38-c5ee-48d0-8e62-f413f1917cd2.jpg?v=1715456229"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_01606a38-c5ee-48d0-8e62-f413f1917cd2.jpg?v=1715456229","width":160},{"alt":null,"id":24469283045439,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_c61cb4f7-17b2-4abf-927f-16457ec60642.jpg?v=1715456229"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_c61cb4f7-17b2-4abf-927f-16457ec60642.jpg?v=1715456229","width":100},{"alt":null,"id":24469283078207,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_daf511b8-b141-485f-b5ec-e1639a816717.jpg?v=1715456229"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_daf511b8-b141-485f-b5ec-e1639a816717.jpg?v=1715456229","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-26 Green Thumb
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":558201405503,"title":"Mayco – Cone 06 - SC-27 Sour Apple","handle":"mayco-sc27","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-18T17:45:40-05:00","created_at":"2018-03-18T17:45:41-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":12700,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823691411519,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC27-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-27 Sour Apple - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823691444287,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC27-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-27 Sour Apple - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823691477055,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC27p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-27 Sour Apple - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":7035627012159,"title":"Gallon - Special Order, Normally ships in 2-3 business days","option1":"Gallon - Special Order, Normally ships in 2-3 business days","option2":null,"option3":null,"sku":"SC27g","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-27 Sour Apple - Gallon - Special Order, Normally ships in 2-3 business days","public_title":"Gallon - Special Order, Normally ships in 2-3 business days","options":["Gallon - Special Order, Normally ships in 2-3 business days"],"price":12700,"weight":7264,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc27_bc43e16e-7420-40e3-8e4c-694a78ba2d70.jpg?v=1715456237","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_2308ccfd-8976-40c0-9964-f33a6e69e201.jpg?v=1715456237","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_478ba93c-9e93-4a08-ac10-087a72859034.jpg?v=1715456237","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_cfe8bf15-7e4b-41a3-aef6-5b3acf155487.jpg?v=1715456237"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc27_bc43e16e-7420-40e3-8e4c-694a78ba2d70.jpg?v=1715456237","options":["Size"],"media":[{"alt":null,"id":24469283110975,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc27_bc43e16e-7420-40e3-8e4c-694a78ba2d70.jpg?v=1715456237"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc27_bc43e16e-7420-40e3-8e4c-694a78ba2d70.jpg?v=1715456237","width":400},{"alt":null,"id":24469283143743,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_2308ccfd-8976-40c0-9964-f33a6e69e201.jpg?v=1715456237"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_2308ccfd-8976-40c0-9964-f33a6e69e201.jpg?v=1715456237","width":160},{"alt":null,"id":24469283176511,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_478ba93c-9e93-4a08-ac10-087a72859034.jpg?v=1715456237"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_478ba93c-9e93-4a08-ac10-087a72859034.jpg?v=1715456237","width":100},{"alt":null,"id":24469283209279,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_cfe8bf15-7e4b-41a3-aef6-5b3acf155487.jpg?v=1715456237"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_cfe8bf15-7e4b-41a3-aef6-5b3acf155487.jpg?v=1715456237","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-27 Sour Apple
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":558201438271,"title":"Mayco – Cone 06 - SC-28 Blue Isle","handle":"mayco-sc28","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-18T17:45:41-05:00","created_at":"2018-03-18T17:45:42-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823691542591,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC28-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-28 Blue Isle - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823691575359,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC28-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-28 Blue Isle - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823691608127,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC28p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-28 Blue Isle - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc28_7b657045-106c-472d-b485-54228a75edd3.jpg?v=1715456244","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_74e4870b-0f2e-4f98-8135-12f6a922026b.jpg?v=1715456244","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_d2bc9836-7bdd-46df-b9b2-2e832eb93685.jpg?v=1715456244","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_5076a2fd-4984-4428-93f1-c7a066537e95.jpg?v=1715456244"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc28_7b657045-106c-472d-b485-54228a75edd3.jpg?v=1715456244","options":["Size"],"media":[{"alt":null,"id":24469283242047,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc28_7b657045-106c-472d-b485-54228a75edd3.jpg?v=1715456244"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc28_7b657045-106c-472d-b485-54228a75edd3.jpg?v=1715456244","width":400},{"alt":null,"id":24469283274815,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_74e4870b-0f2e-4f98-8135-12f6a922026b.jpg?v=1715456244"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_74e4870b-0f2e-4f98-8135-12f6a922026b.jpg?v=1715456244","width":160},{"alt":null,"id":24469283307583,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_d2bc9836-7bdd-46df-b9b2-2e832eb93685.jpg?v=1715456244"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_d2bc9836-7bdd-46df-b9b2-2e832eb93685.jpg?v=1715456244","width":100},{"alt":null,"id":24469283340351,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_5076a2fd-4984-4428-93f1-c7a066537e95.jpg?v=1715456244"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_5076a2fd-4984-4428-93f1-c7a066537e95.jpg?v=1715456244","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-28 Blue Isle
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":558201471039,"title":"Mayco – Cone 06 - SC-29 Blue Grass","handle":"mayco-sc29","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-18T17:45:42-05:00","created_at":"2018-03-18T17:45:43-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823692099647,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC29-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-29 Blue Grass - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823692132415,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC29-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-29 Blue Grass - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823692165183,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC29p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-29 Blue Grass - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc29_e7eafdd5-9322-4186-a9e4-0005ff360fa1.jpg?v=1715456252","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_b79ecc9a-2978-4481-9a47-0b1c743702ae.jpg?v=1715456252","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_6923cc98-adfe-4f45-be33-14e5265b9351.jpg?v=1715456252","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_ec5b6cf9-090b-47ae-b113-683556a5c320.jpg?v=1715456252"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc29_e7eafdd5-9322-4186-a9e4-0005ff360fa1.jpg?v=1715456252","options":["Size"],"media":[{"alt":null,"id":24469283995711,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc29_e7eafdd5-9322-4186-a9e4-0005ff360fa1.jpg?v=1715456252"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc29_e7eafdd5-9322-4186-a9e4-0005ff360fa1.jpg?v=1715456252","width":400},{"alt":null,"id":24469284028479,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_b79ecc9a-2978-4481-9a47-0b1c743702ae.jpg?v=1715456252"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_b79ecc9a-2978-4481-9a47-0b1c743702ae.jpg?v=1715456252","width":160},{"alt":null,"id":24469284061247,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_6923cc98-adfe-4f45-be33-14e5265b9351.jpg?v=1715456252"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_6923cc98-adfe-4f45-be33-14e5265b9351.jpg?v=1715456252","width":100},{"alt":null,"id":24469284094015,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_ec5b6cf9-090b-47ae-b113-683556a5c320.jpg?v=1715456252"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_ec5b6cf9-090b-47ae-b113-683556a5c320.jpg?v=1715456252","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-29 Blue Grass
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
{"id":558200586303,"title":"Mayco – Cone 06 - SC-3 Wine About It","handle":"mayco-sc3","description":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2018-03-18T17:45:17-05:00","created_at":"2018-03-18T17:45:17-05:00","vendor":"Mayco Coloramics","type":"Mayco Cone 06-10 SC Stroke \u0026 Coat Glazes","tags":["discount20","Glaze Line_Mayco (SC) Stroke \u0026 Coat"],"price":475,"price_min":475,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40823686561855,"title":"2oz. - Stock Item, Normally ships in one business day","option1":"2oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC3-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-3 Wine About It - 2oz. - Stock Item, Normally ships in one business day","public_title":"2oz. - Stock Item, Normally ships in one business day","options":["2oz. - Stock Item, Normally ships in one business day"],"price":475,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823686594623,"title":"8oz. - Stock Item, Normally ships in one business day","option1":"8oz. - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC3-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-3 Wine About It - 8oz. - Stock Item, Normally ships in one business day","public_title":"8oz. - Stock Item, Normally ships in one business day","options":["8oz. - Stock Item, Normally ships in one business day"],"price":1150,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40823686627391,"title":"Pint - Stock Item, Normally ships in one business day","option1":"Pint - Stock Item, Normally ships in one business day","option2":null,"option3":null,"sku":"SC3p","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mayco – Cone 06 - SC-3 Wine About It - Pint - Stock Item, Normally ships in one business day","public_title":"Pint - Stock Item, Normally ships in one business day","options":["Pint - Stock Item, Normally ships in one business day"],"price":2100,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc3_febed298-7b4f-46a3-9e97-53f648d751a2.jpg?v=1715456056","\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_828aea2f-7876-461e-a681-48c65a005e39.jpg?v=1715456056","\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_cbe405a7-7a6d-40ba-93a0-67d774484ba2.jpg?v=1715456056","\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_d5c234f9-1bde-44ba-b28c-b9505e64c5ca.jpg?v=1715456056"],"featured_image":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc3_febed298-7b4f-46a3-9e97-53f648d751a2.jpg?v=1715456056","options":["Size"],"media":[{"alt":null,"id":24469276459071,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc3_febed298-7b4f-46a3-9e97-53f648d751a2.jpg?v=1715456056"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/mayco_sc3_febed298-7b4f-46a3-9e97-53f648d751a2.jpg?v=1715456056","width":400},{"alt":null,"id":24469276491839,"position":2,"preview_image":{"aspect_ratio":1.0,"height":160,"width":160,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_828aea2f-7876-461e-a681-48c65a005e39.jpg?v=1715456056"},"aspect_ratio":1.0,"height":160,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/ap_seal_828aea2f-7876-461e-a681-48c65a005e39.jpg?v=1715456056","width":160},{"alt":null,"id":24469276524607,"position":3,"preview_image":{"aspect_ratio":1.0,"height":100,"width":100,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_cbe405a7-7a6d-40ba-93a0-67d774484ba2.jpg?v=1715456056"},"aspect_ratio":1.0,"height":100,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/dinnerware_cbe405a7-7a6d-40ba-93a0-67d774484ba2.jpg?v=1715456056","width":100},{"alt":null,"id":24469276557375,"position":4,"preview_image":{"aspect_ratio":1.021,"height":96,"width":98,"src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_d5c234f9-1bde-44ba-b28c-b9505e64c5ca.jpg?v=1715456056"},"aspect_ratio":1.021,"height":96,"media_type":"image","src":"\/\/tiendaenvasado.com\/cdn\/shop\/files\/spray-symbol_d5c234f9-1bde-44ba-b28c-b9505e64c5ca.jpg?v=1715456056","width":98}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat® was originally developed to be a cone 06 bisque glaze. The \"heavy-duty\" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost \"guarantee\" a good fired result. \"Goof-proof\", forgiving, tolerant. As user from various markets began using the glaze they informed us of the amazing results they achieved, using the glaze in ways we had not intended or anticipated. The ultimate \"happy accident.\"\u003c\/p\u003e \u003cp\u003e15 years later Stroke \u0026amp; Coat® has become our most popular glaze and it is used in every ceramics market Mayco serves.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Features and Attributes\u003cbr\u003e \u003c\/strong\u003eStroke \u0026amp; Coat®is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze The extraordinary tolerance and forgiveness of Stroke \u0026amp; Coat® allows it to be used as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFiring Temperature\u003c\/strong\u003e - can be fired from cone 06 to cone 10\u003cbr\u003e \u003cstrong\u003eKiln Atmosphere\u003c\/strong\u003e - reduction or oxidation firing\u003cbr\u003e \u003cstrong\u003eSurface\u003c\/strong\u003e - can be applied to greenware of bisque\u003cbr\u003e \u003cstrong\u003eBody\u003c\/strong\u003e - can be applied to earthenware, stoneware or porcelain\u003cbr\u003e \u003cstrong\u003eApplication Thickness\u003c\/strong\u003e - translucent and water-color effects can be achieved with thin applications; full opacity is achieved with thicker applications - if layered it can create dimensional effects\u003cbr\u003e \u003cstrong\u003eIntermixable\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes can be blended to create new colors\u003cbr\u003e \u003cstrong\u003eDesign Integrity\u003c\/strong\u003e - can be used to created intricate, detailed designs. Colors butted against one another will not blend. Used in Majolica techniques the glaze will not move nor will it blend into the base glaze beneath it.\u003cbr\u003e \u003cstrong\u003eLight over Dark\u003c\/strong\u003e - light colors will remain opaque when layered on top of darker colors (3 coat coverage recommended).\u003cbr\u003e \u003cstrong\u003eLiquid-to-Fired Color Consistency\u003c\/strong\u003e - the colors in their liquid state accurately represent the fired color\u003cbr\u003e \u003cstrong\u003eGlossy Finish\u003c\/strong\u003e - Stroke \u0026amp; Coat® will fire to a gloss finish - clear glaze is not required\u003cbr\u003e \u003cstrong\u003eWide Palette of Colors\u003c\/strong\u003e - Stroke \u0026amp; Coat® glazes are available in over 70 vibrant bright and pastel shades.\u003cbr\u003e \u003cstrong\u003eNon-Toxic, Food Safe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e \u003cstrong\u003eApplication Recommendations:\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eThe following application recommendations are based upon the original product development intent and use for the product.\u003c\/em\u003e\u003cbr\u003e \u003cbr\u003e Information on alternative application methods is listed in the section \"Usage Variations and FAQ's Below\".\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eShake for 5-6 seconds before use.\u003c\/strong\u003e Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).\u003c\/p\u003e \u003cp\u003eFor all-over coverage we recommend using broad bristled brush. One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications three coats will be sufficient for complete opaque coverage.\u003c\/p\u003e \u003cp\u003eLet dry and fire to shelf cone 06. We do not recommend \"force\" drying (using a hair dryer, for example) as you may experience cracks or crevices in the fired finish.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDue to the chrome-tin pigments in the formula, SC-13 Grapel and SC-33 Fruit of the Vine are sensitive to non-toxic clear glaze application. We would recommend testing first and light application of clear glaze to avoid flashing or milkiness.\u003cbr\u003e \u003cbr\u003e SC-70 Pink-A-Dot is more translucent than the rest of the Stroke \u0026amp; Coat®. This color may require a 4th coat to achieve opaque coverage.\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUSAGE VARIATIONS AND FAQ’S\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDetailed Artwork\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® is great for design work.\u003c\/p\u003e \u003cp\u003eIt will not move nor will it blend with glazes it is layered upon.\u003c\/p\u003e \u003cp\u003eYou can butt colors against one another - the integrity of your design will be preserved.\u003c\/p\u003e \u003cp\u003eLighter colors can be used on top of darker colors and remain opaque and bright.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWater Color Effects\u003c\/strong\u003e\u003cbr\u003e Stroke \u0026amp; Coat® can be thinned with water or media (AC-304) and applied as a wash or used to create water-color styled paintings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAccent Color\u003c\/strong\u003e\u003cbr\u003e Potters and Clay Artists have found Stroke \u0026amp; Coat® to be useful when they wish to add a bit of color to their work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntricate Design Capabilities\u003c\/strong\u003e\u003cbr\u003e The design created before firing is completely preserved after firing. Any blending, mixing, layering or butting done during the glazing process will remain intact and exact. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I have to use clear glaze to achieve a glossy finish? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® fires to a gloss finish and does not require clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer's directions over the unfired Stroke \u0026amp; Coat®and fire once.\u003cbr\u003e Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or \"milky\" fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. - whatever is needed to reduce to total amount of glaze placed on the ware. For pieces already fired - you may improve the fired finish by refiring the pieces and adding a hold\/soak time at the end of the firing cycle (10-15 minutes).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Are Stroke \u0026amp; Coat®'s luster compatible? \u003c\/strong\u003e\u003cbr\u003e A: All colors are luster compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How can I create dimensional effects with Stroke \u0026amp; Coat®? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I achieve best results when applying Stroke \u0026amp; Coat® to greenware? \u003c\/strong\u003e\u003cbr\u003e A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed - for example: the back of a tile, the foot of a vessel. If you do completely glaze a greenware piece you may experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to get a gloss finish. Always test to see if Stroke \u0026amp; Coat® will on your specific greenware project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What are the guidelines for firing Stroke \u0026amp; Coat® to Higher temperatures (cone 6 - cone 10)? \u003c\/strong\u003e\u003cbr\u003e A: Many of the Stroke \u0026amp; Coat® colors perform well at mid range (cone 5-6) and high (cone 9-10) temperatures. Darker colors - green, red, blue, orange, purple - will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors - pink, yellow, tan, lighter purples - will fade. Always test to see if this application variance will work on your specific project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can Stroke \u0026amp; Coat® be used with other products? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® glazes are compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as then work will become distorted.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why is Stroke \u0026amp; Coat® different from other glazes? \u003c\/strong\u003e\u003cbr\u003e A: Stroke \u0026amp; Coat® is a heavy-bodied glaze that smooths-out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes - it behaves more like a traditional underglaze as it \"stays put\" where it is applied. It's like having 4 or 5 different glazes in one bottle - a Wonderglaze™ for bisque and clay.\u003c\/p\u003e \u003cp\u003eFor Product MSDS Sheets Click on \"Literature\" at the bottom of any page on our site.\u003c\/p\u003e \u003c\/body\u003e"}
Mayco – Cone 06 - SC-3 Wine About It
€4.75
PRODUCT DESCRIPTION Stroke & Coat® was originally developed to be a cone 06 bisque glaze. The "heavy-duty" performance of the glaze was built-in as a feature for novice, young (school children) or new practitioners; we set out to develop a glaze that would almost "guarantee" a good fired result. "Goof-proof", forgiving, tolerant. As user fr...
