Vendor: Skutt
Type: Miscellaneous
Price:
48.00
Skutt Replacement Type K Thermocouple with wire and block for Digital Pyrometer
Vendor: Skutt
Type: Miscellaneous
Price:
6.00
Skutt Envirovent2 Fiber Gasket
Vendor: Skutt
Type: Miscellaneous
Price:
3.50
Skutt Envirovent2 Spring
Vendor: Skutt
Type: Miscellaneous
Price:
24.00
Skutt Envirovent2 Stand
Vendor: Skutt
Type: Miscellaneous
Price:
60.00
Skutt Envirovent2 Plenum Cup with Fiber Gasket
Vendor: Skutt
Type: Miscellaneous
Price:
95.00
For the price, this is a great choice for glass temperatures applications. However, even though this pyrometer has a temperature rating of 2375 F printed on the face of the unit, Skutt does not recommend it for these temperatures due to the small gauge thermocouple that comes with the unit. If you are using it for temperatures above cone 1 (2079 F, 1137 C) Skutt recommends stepping up to the Dual Input Pyrometer. The K2 comes with the following items:
1 – 2350 F (1285 C) Pyrometer with mounting case 1 – 6ft Type K insulated thermocouple wire with 5″, 22 gauge, Type K Thermocouple 1 – 9 volt battery included
Vendor: Skutt
Type: Miscellaneous
Price:
33.00
The Skutt Envirovent2 is spring loaded to the floor to keep a consistent seal on the kiln slab as it bows slightly when heated. This adapter fits into any Skutt rolling stands, supported by the crossbars, and allows the spring loaded plenum cup to push against the plate instead of the floor. Of course the customer can only roll it so far when connected to the ducting, but at least they no longer need to crawl on the floor to reposition the cup every time they move it.
Vendor: Skutt
Type: Miscellaneous
Price:
160.00
This Pyrometer comes with a Type K thermocouple, thermocouple mounting block, 5 feet of thermocouple wire, and a pyrometer flange for mounting the thermocouple to the kiln. The Pyrometer comes with a case that can be mounted to the wall. It also has a flip out back so that it can be set on a table or shelf. Since it is “Dual Input”, you can purchase an additional thermocouple package and monitor two kilns. It even remembers the minimum and maximum temperatures recorded in a firing. It is rated to Cone 10 with a plus or minus 0.4% of reading accuracy.
Vendor: Skutt
Type: Miscellaneous
Price:
6.00
Skutt Kiln Instruction Manual
Vendor: Skutt
Type: Miscellaneous
Price:
8.50
Skutt Kiln Instruction Manual
Vendor: Skutt
Type: Miscellaneous
Price:
8.50
Skutt Kiln Instruction Manual
Vendor: Skutt
Type: Miscellaneous
Price:
8.50
Skutt Kiln Instruction Manual
Vendor: Skutt
Type: Miscellaneous
Price:
8.50
Skutt Kiln Instruction Manual
Vendor: Skutt
Type: Miscellaneous
Price:
8.00
Skutt Silicone for sealing Envirovent motor to Envirovent or for sealing kiln bottom slab to vent.
Vendor: Skutt
Type: Miscellaneous
Price:
40.00
Skutt Envirovent2 Duct. 3” diameter flexible aluminum duct.
Vendor: Skutt
Type: Miscellaneous
Price:
380.00
Skutt Envirovent2 Replacement Motor.tiendaenvasadoludes power cord and toggle switch preinstalled.
Vendor: Skutt
Type: Skutt Miscellaneous
Price:
425.00
In November 2021 Skutt announced that the cost for this replacement motor has exceeded the cost for a brand new EnviroVent2 system so they made the decision to discontinue it.
tiendaenvasado Part Numbers
1000226
Skutt Part Numbers
1631
Skutt Envirovent Replacement Motor.tiendaenvasadoludes silicone for sealing the new motor to the existing vent. Also includes power cord and toggle switch preinstalled.
Vendor: Skutt
Type: Miscellaneous
Price:
2.00
Skutt Plastic Feet for Kiln stands. Fits all kiln stands.
Vendor: Skutt
Type: Miscellaneous
Price:
96.00
For Model | Skutt Part Numbers | KPS Part Numbers |
1627-3 | 2567 | 1000219 |
1231-3 | 0281 and 0270 | 1000220 |
12xx | 0281 | 1000221 |
10xx & GlazeTech | 0170 | 1000222 |
8xx | 0270 | 1000223 |
7xx and 6xx | 0470 | 1000224 |
Skutt Replacement kiln stands.tiendaenvasadoludes plastic feet.
Vendor: Skutt
Type: Miscellaneous
Price:
99.00
For Model | Skutt Part Numbers | KPS Part Numbers |
1627-3 | 2567 | 1000219 |
1231-3 | 0281 and 0270 | 1000220 |
12xx | 0281 | 1000221 |
10xx & GlazeTech | 0170 | 1000222 |
8xx | 0270 | 1000223 |
7xx and 6xx | 0470 | 1000224 |
Skutt Replacement kiln stands.tiendaenvasadoludes plastic feet.
Vendor: Skutt
Type: Miscellaneous
Price:
103.00
For Model | Skutt Part Numbers | KPS Part Numbers |
1627-3 | 2567 | 1000219 |
1231-3 | 0281 and 0270 | 1000220 |
12xx | 0281 | 1000221 |
10xx & GlazeTech | 0170 | 1000222 |
8xx | 0270 | 1000223 |
7xx and 6xx | 0470 | 1000224 |
Skutt Replacement kiln stands.tiendaenvasadoludes plastic feet.
Vendor: Skutt
Type: Miscellaneous
Price:
120.00
For Model | Skutt Part Numbers | KPS Part Numbers |
1627-3 | 2567 | 1000219 |
1231-3 | 0281 and 0270 | 1000220 |
12xx | 0281 | 1000221 |
10xx & GlazeTech | 0170 | 1000222 |
8xx | 0270 | 1000223 |
7xx and 6xx | 0470 | 1000224 |
Skutt Replacement kiln stands.tiendaenvasadoludes plastic feet.
Vendor: Skutt
Type: Miscellaneous
Price:
223.00
For Model | Skutt Part Numbers | KPS Part Numbers |
1627-3 | 2567 | 1000219 |
1231-3 | 0281 and 0270 | 1000220 |
12xx | 0281 | 1000221 |
10xx & GlazeTech | 0170 | 1000222 |
8xx | 0270 | 1000223 |
7xx and 6xx | 0470 | 1000224 |
Skutt Replacement kiln stands.tiendaenvasadoludes plastic feet.
Vendor: Skutt
Type: Miscellaneous
Price:
325.00
For Model | Skutt Part Numbers | KPS Part Numbers |
1627-3 | 2567 | 1000219 |
1231-3 | 0281 and 0270 | 1000220 |
12xx | 0281 | 1000221 |
10xx & GlazeTech | 0170 | 1000222 |
8xx | 0270 | 1000223 |
7xx and 6xx | 0470 | 1000224 |
Skutt Replacement kiln stands.tiendaenvasadoludes plastic feet.
Vendor: Skutt
Type: Miscellaneous
Price:
16.00
Skutt Sairset is a refractory coating that is used on Lids to prevent dust from falling into the kiln during firing. This is not a glue and should be applied in a thin layer to seal the brick surface.